Services

Please be aware that due to the nature of our work, our engineer may arrive up to one hour later than the scheduled time. Please avoid using the boiler for two hours before our visit. If possible, kindly provide the boiler's make and model. Upon completion, you will receive a certificate via email, and a friendly auto-yearly reminder will be set up. A gas boiler service is a comprehensive inspection, cleaning, and maintenance procedure per the manufacturer's instructions. A service ensures the boiler operates efficiently and safely. A fully qualified, card-carrying, gas-safe engineer carries this out. The inspection generally includes: - Visual inspection: - Tightness test: - Ventilation and air supply: - Gas rate and burner pressure: - Safety devices: - Boiler pressure. - Flue gas termination. - Condensate trap cleaning. - Burner seal and gasket replacement, if required. - Pressure vessel inspection.

Please be aware that, due to the nature of our work, our engineer may arrive up to 1 hour after the scheduled time. When booking, please give the boiler's make, model, and fault details in the notes section. An engineer will diagnose and aim to rectify any gas boiler/system issues on this visit if achievable. This is our standard 0-60 minutes callout fee. Any additional work will be charged separately.

Please be aware that due to the nature of our work, our engineer may arrive up to one hour later than the scheduled time. The fee is for one appliance; each additional appliance will be charged at £20. Kindly provide your gas appliance's make and model, if known. Gas safety inspections for landlords are yearly checks of gas appliances and systems in a rental property by a certified Gas Safe Registered Engineer. This is a legal requirement. Upon completion, you will receive a certificate (CP12) via email, and a friendly yearly automated reminder will be set up. This procedure is also required for homeowners selling their property. The inspection includes: - Visual inspection: - Tightness test: - Ventilation and air supply: - Gas rate and burner pressure: - Safety devices: - Flue gases: The inspection usually takes about 30-45 minutes, but it may take longer if repairs are needed.

A "strip down" boiler service is a comprehensive and detailed maintenance process beyond a standard service. It often involves removing, thoroughly cleaning, and replacing internal components, and it is usually required every 4-5 years. We purchase the manufacturer's boiler service kit (£60-£90 RRP) and replace all elements within the kit. This deeper cleaning helps remove sediment, prevent wear and tear, and identify potential problems before they escalate. Here's a more detailed explanation. - Internal Component Removal - The service removes components like the burner, gas valve, heat exchanger, and condensate trap. - Thorough Cleaning - Internal components are cleaned to remove sediment and debris, ensuring optimal performance. - Component Inspection - Each component is inspected for wear, damage, or other issues. - Replacements - Parts like spark electrodes, gaskets & seals are replaced. - System Checks - Safety checks include visual inspections, gas pressure tests, and flue gas

Select pickup at checkout, and we'll arrange a visit to your property or use the booking system. A digital RF programmable room thermostat and receiver are suitable for controlling one heating zone. It features OpenTherm®, Optimum Start, TPI and On/Off control modes. Boiler Plus Compliant. Please visit the website below for full details: https://www.ephcontrols.com/section/cp4/

Select pickup at checkout, and we'll arrange a visit to your property or use our online booking system. CO7B battery-operated carbon monoxide alarm with 7-year sensor and battery life. Features test and hush/silence button, low battery warning, end-of-life indication and sealed-in lithium battery.